Fix the HP laserjet 1320 Error light on your devices as soon as possible. To avoid disruptions, make sure you carefully follow the instructions. If your wireless status blinks slowly and the signal bar's strength indication channels through the signal bar, the printer is hunting for a wireless connection. For your HP laser 1320, you'll need to contact the guidance centre and assistance. If all of the lights on the printer are blinking, the printer is in an error status.
Updating specific drivers in Device Manager:-
In Windows, search for and open Device Manager.
In the list of devices, expand the device you want to update.
Right-click the device and then select Update driver or Update driver software.
Click Search automatically for updated driver software.
How do I reset my HP LaserJet 1320?
The correct procedure for a cold reset is to turn the printer off.
Turn the printer off.
Press and hold down the GO button.
Turn the printer on, and continue to hold the GO button for at least 20 seconds. During. this process, the GO button, Attention, and Ready LEDs each turn on.
Release the GO button.
Regards,
Willjoe